July 19, 2019

Just one button to provision a production-grade Kubernetes cluster

(this is a guest post, authored by my esteemed colleague Fabio Di Niro)

Do you remember?


I bet all of you who are working or playing with Kubernetes remember perfectly the first time you tried to install it.
And the second.
And the third.
...
And the one that finally worked out.

And if you’re a professional you remember also the long path that brought you to own the expertise on Kubernetes that you need to install and fine-tune production grade clusters.
Or, if you’re not a Kubernetes professional, you probably remember how much time it took for you to find someone able to perform a valid Kubernetes install...and how much it costed.

To save all this time and effort to our customers Cisco released the Cisco Container Platform (CCP), a turnkey solution to easily provision production-grade Kubernetes clusters on-prem or in the cloud in minutes, with few mouse clicks and requiring little to no knowledge of K8s.
All the needed integrations with network, storage, computing and security are done automatically by CCP so that the provisioned K8s clusters are ready to run in production.
Clusters provisioned by CCP are already equipped with finely configured monitoring and logging tools like FluentD, Grafana, ElasticSearch, Kibana.
Through the Container Network Interface (CNI) you can choose whether to leverage Cisco ACI as network infrastructure or Calico (no dependence on the underlying infrastructure).

This is already great, but I thought to create a demo that may push the simplicity of those “few mouse clicks” to its limit, making possible to create a production grade cluster in just one click.







Introducing the Kubernetes dash button.

The concept is fairly simple: build a dash button that, once pressed, creates a production grade Kubernetes cluster ready to use.

Leveraging the rich set of the Cisco Container Platform (CCP) APIs this is even too easy, so I thought to add some more feature on top:

- I wanted to provision the cluster and access it just through the dash button. So, I want CCP to display on the dash button itself the IP address of the master node of the cluster created
- The start and finish of the cluster provisioning process had to be confirmed, so the communications had to be bi-directional with the dash button
- I wanted a fair battery life that would avoid me to recharge the button every day, so I needed to have electronics able to sleep or hibernate
- My lab, where I have the infrastructure and the CCP, is behind a proxy, so I can’t listen for calls inside the lab, I can just initiate communications from the lab. So, I needed a way to change the “push” of the button in a “pull” of the button press information
- I wanted to use the button everywhere I go without worrying about the local Wi-Fi settings



How it works

To satisfy all the above requirements I added a couple of elements in the picture, ending up with the following architecture:



The button is based on an Arduino ESP 32 board, it connects via Wi-Fi to my smartphone and uses its internet connection, this way I can use the button everywhere my phone has data signal. The button leverages a publish-subscribe message service (MQTT) in the cloud to bypass the limitation of the proxy I have behind my lab and reach a couple of scripts that calls the right API in the Cisco Container Platform to trigger the provisioning of a shiny new Kubernetes cluster.
Once the cluster is provisioned the IP address of the master node is returned to the dash button that shows it on its display, at this point it is ready to accept connection and be used.

A 3D printed enclosure completed my project, I took an existing model but then I decided to  leverage the capabilities of CCP to deploy K8s clusters on-prem or in the cloud so I designed the two different enclosures you can see in the picture to have two different dash buttons for the two different deployment target.
All the code and 3D designs have been released and are publicly available at: https://github.com/fdiniro/CCPDashButton




Now, before doing my demo, I can ask to my customers: “How much time and effort takes you to install a production-grade, fully operationalized and secured kubernetes cluster?” and whatever answer I get I know I can answer “I can do it in 2 minutes blindfolded and cuffed”.

You can see the recorded demo here: https://youtu.be/-F-xR0XNPBs



No comments:

Post a Comment

Note: Only a member of this blog may post a comment.